Be yourself; Everyone else is already taken.
— Oscar Wilde.
This is the first post on my new blog. I’m just getting this new blog going, so stay tuned for more. Subscribe below to get notified when I post new updates.
What You Should Do In A Plumbing Situation
Ready to begin with your own plumbing jobs? Do you know where to start or how to begin? Do you know what equipment and techniques will work for your next task? Well, the tips that are listed below may be the very ones that you need.
Pump your septic tank every five years to keep it working well. This prevents sediment from building up in the tank and causing a backup into your home or causing the failure of the septic system itself. Although it is somewhat of an expense to pump out a septic tank, it is nothing compared to what you will have to spend on cleaning up a backup of sewage or repairing or replacing your septic system.
To avoid sediment buildup, drain gallons of water from your water heater to flush any corrosion. This will help your heater to run more efficiently therefore saving you regular energy costs. Make sure to read your heater’s instructions before attempting this, and do this periodically to make sure that your heater is running as well as it can.
Don’t shrug off that trickle coming from your toilet as a small problem. Even the tiniest leak can be quite expensive in the long run as you end up wasting potentially hundreds of gallons of water. See if you can find the root of the leak, or seek out professional advice, and keep your toilet running efficiently.
DIY plumbing jobs will require that you understand how to solder copper for the lines for the water supply. You can practice this skill so that you will be able to run your lines without worrying about it leaking. Search online for video tutorials that can help you get a handle on how to go about soldering.
One way to prevent water heater problems is to turn down the heat. As long as the water is still as hot as needed for showers and washing dishes, turning it down won’t hurt anything, and will extend the life of the heater. Holding very hot water can corrode the inside.
If you have a lot of hair in your shower drain, be sure to get a stopper and put it in the drain. This will catch the hair from going down the drain, which can clog it. Just make sure that you remove hair that is already in the drain before using the stopper.
Valves that are rarely used tend to fuse together. Use penetrating oil to maintain them and run water through them once in a while.
If the pipes have burst in an upstairs area, use a tool to perforate the ceiling underneath in several places and places pots and pans under to catch the water. If this is not done, the weight of the accumulating water could cause a collapse of the entire ceiling.
Heat up frozen pipes carefully if they have frozen. In colder regions, pipes placed closest to outer walls and ceilings could freeze if not properly insulated. Use hot rags, hot water, a blow dryer or similar heat source. Start heating at a place nearest the tap, then work backwards.
Check to make burnet plumbing services that the walls behind the tiles in your bathroom are not soft. Push into the tiles to confirm that the foundation is firm and robust. If the area is delicate and brittle, there is a good chance that water has created damage behind the tiles over time.
If you have a leak and your water bill is going up, there is a method you can try before you call a professional. You can use the red-dye system to detect whether the leak is above ground, underground, or whether it has anything to do with the toilets.
Many people complain of low water pressure. While there are several things that can cause this, one must not be overlooked when starting your investigation. What kind of pipes do you have? If your piping is galvanized, you are better off just replacing your piping which will eliminate the issue.
Fair enough, you’re not going to become an expert overnight – but there are surely one or two pieces of advice here that you can use. Every job that you do yourself is one less job that you have to pay someone else to do!
Pump your septic tank every five years to keep it working well. This prevents sediment from building up in the tank and causing a backup into your home or causing the failure of the septic system itself. Although it is somewhat of an expense to pump out a septic tank, it is nothing compared to what you will have to spend on cleaning up a backup of sewage or repairing or replacing your septic system.
To avoid sediment buildup, drain gallons of water from your water heater to flush any corrosion. This will help your heater to run more efficiently therefore saving you regular energy costs. Make sure to read your heater’s instructions before attempting this, and do this periodically to make sure that your heater is running as well as it can.
Don’t shrug off that trickle coming from your toilet as a small problem. Even the tiniest leak can be quite expensive in the long run as you end up wasting potentially hundreds of gallons of water. See if you can find the root of the leak, or seek out professional advice, and keep your toilet running efficiently.
DIY plumbing jobs will require that you understand how to solder copper for the lines for the water supply. You can practice this skill so that you will be able to run your lines without worrying about it leaking. Search online for video tutorials that can help you get a handle on how to go about soldering.
One way to prevent water heater problems is to turn down the heat. As long as the water is still as hot as needed for showers and washing dishes, turning it down won’t hurt anything, and will extend the life of the heater. Holding very hot water can corrode the inside.
If you have a lot of hair in your shower drain, be sure to get a stopper and put it in the drain. This will catch the hair from going down the drain, which can clog it. Just make sure that you remove hair that is already in the drain before using the stopper.
Valves that are rarely used tend to fuse together. Use penetrating oil to maintain them and run water through them once in a while.
If the pipes have burst in an upstairs area, use a tool to perforate the ceiling underneath in several places and places pots and pans under to catch the water. If this is not done, the weight of the accumulating water could cause a collapse of the entire ceiling.
Heat up frozen pipes carefully if they have frozen. In colder regions, pipes placed closest to outer walls and ceilings could freeze if not properly insulated. Use hot rags, hot water, a blow dryer or similar heat source. Start heating at a place nearest the tap, then work backwards.
Check to make burnet plumbing services that the walls behind the tiles in your bathroom are not soft. Push into the tiles to confirm that the foundation is firm and robust. If the area is delicate and brittle, there is a good chance that water has created damage behind the tiles over time.
If you have a leak and your water bill is going up, there is a method you can try before you call a professional. You can use the red-dye system to detect whether the leak is above ground, underground, or whether it has anything to do with the toilets.
Many people complain of low water pressure. While there are several things that can cause this, one must not be overlooked when starting your investigation. What kind of pipes do you have? If your piping is galvanized, you are better off just replacing your piping which will eliminate the issue.
Fair enough, you’re not going to become an expert overnight – but there are surely one or two pieces of advice here that you can use. Every job that you do yourself is one less job that you have to pay someone else to do!
Anytime you have a plumbing problem, you do not need to get stressed out. This article will give you some tips to learn how to handle plumbing problems. Remember to take your time when fixing anything yourself so that you do not cause any further damage from happening to your pipes.
Use the sounds you hear from your pipes to help you to determine what they problem is. Certain sounds mean the water pressure is too high. Other sounds can signify loose pipes or slight clogs from calcium or iron build up. Listening to your pipes can save you a lot of money hunting down the problem.
Routinely check your appliance connections and faucets around the house for any kind of obvious leaks or nearby signs of moisture. Not only do even the smallest leaks lead to a large waste of water and money, they also can lead to damage to your home or even the development of harmful molds.
It is not always necessary to call in a plumber when you have a damaged section of pipe in your plumbing. There are repair kits you can buy in your local hardware store which are excellent in repairing leaks. If you have a small leak, you can rub a compound stick over the hole or crack in the pipe to seal it shut. Epoxy paste is also an excellent remedy for a leaking pipes. Make sure you turn off the water and completely dry the pipe before applying the epoxy.
Find out the plumbing codes in your local area before starting any project. Plumbing codes can vary wildly from area to area and you don’t want to run afoul of the codes. Visit your local building department to find out information or hire a plumber for a day to help you go over your plans and provide advice.
Make sure that your tool box is ready for any project you are preparing to do. The last thing you want is to be knee deep in a job only to find that you are missing the one tool you need to finish. Be sure to have various sizes of pipe wrenches that can be used to complete any job.
If your sewer is backed up, there are things you can do to troubleshoot and clean, including renting equipment like a main line cable. However, often times this does not fully take care of the problem. A professional needs to assess the issue then, using a camera method, and thoroughly cleaning the main line.
Avoid using drain cleaners as much as possible. There are some harsh, corrosive chemicals found in these drain cleaners. That’s why they work so well to knock out clogs. Over time, they will corrode your pipes. Rather than using burnet plumbing services , hire a plumber to fix your blockage problems.
Using a snake tool to remove blockages is very easy. Just insert the tool a few inches into the drain, and then turn the handle to change the direction of the snake head and search for blockages. Continue moving down slowly and searching until you find the cause of your blockage.
Plumbing should only be done by professionals if there is a major problem or if you do not understand plumbing. Many of the big problems that plumbers deal with, actually have simple solutions. The average person, who does not understand the intricacies of plumbing, usually end up compounding the problem by causing other costly damage to the house during the failed repair. The plumber will need to be called in the end, anyway.
You should contact your local Consumer Affairs Department before you hire any plumber. You will be able to check their license and know if people have complained about this specific contractor. A contractor’s license must be in good standing and current for you to even consider him.
You have learned many ways to handle a wide variety of plumbing problems. Take the advice in this article to use as a guide. If you have any further questions, make sure to take the time to find the answers using the internet or a professional so that you know exactly what you are doing before you start.
Routinely check your appliance connections and faucets around the house for any kind of obvious leaks or nearby signs of moisture. Not only do even the smallest leaks lead to a large waste of water and money, they also can lead to damage to your home or even the development of harmful molds.
It is not always necessary to call in a plumber when you have a damaged section of pipe in your plumbing. There are repair kits you can buy in your local hardware store which are excellent in repairing leaks. If you have a small leak, you can rub a compound stick over the hole or crack in the pipe to seal it shut. Epoxy paste is also an excellent remedy for a leaking pipes. Make sure you turn off the water and completely dry the pipe before applying the epoxy.
Find out the plumbing codes in your local area before starting any project. Plumbing codes can vary wildly from area to area and you don’t want to run afoul of the codes. Visit your local building department to find out information or hire a plumber for a day to help you go over your plans and provide advice.
Make sure that your tool box is ready for any project you are preparing to do. The last thing you want is to be knee deep in a job only to find that you are missing the one tool you need to finish. Be sure to have various sizes of pipe wrenches that can be used to complete any job.
If your sewer is backed up, there are things you can do to troubleshoot and clean, including renting equipment like a main line cable. However, often times this does not fully take care of the problem. A professional needs to assess the issue then, using a camera method, and thoroughly cleaning the main line.
Avoid using drain cleaners as much as possible. There are some harsh, corrosive chemicals found in these drain cleaners. That’s why they work so well to knock out clogs. Over time, they will corrode your pipes. Rather than using burnet plumbing services , hire a plumber to fix your blockage problems.
Using a snake tool to remove blockages is very easy. Just insert the tool a few inches into the drain, and then turn the handle to change the direction of the snake head and search for blockages. Continue moving down slowly and searching until you find the cause of your blockage.
Plumbing should only be done by professionals if there is a major problem or if you do not understand plumbing. Many of the big problems that plumbers deal with, actually have simple solutions. The average person, who does not understand the intricacies of plumbing, usually end up compounding the problem by causing other costly damage to the house during the failed repair. The plumber will need to be called in the end, anyway.
You should contact your local Consumer Affairs Department before you hire any plumber. You will be able to check their license and know if people have complained about this specific contractor. A contractor’s license must be in good standing and current for you to even consider him.
You have learned many ways to handle a wide variety of plumbing problems. Take the advice in this article to use as a guide. If you have any further questions, make sure to take the time to find the answers using the internet or a professional so that you know exactly what you are doing before you start.
Introduce Yourself (Example Post)
This is an example post, originally published as part of Blogging University. Enroll in one of our ten programs, and start your blog right.
You’re going to publish a post today. Don’t worry about how your blog looks. Don’t worry if you haven’t given it a name yet, or you’re feeling overwhelmed. Just click the “New Post” button, and tell us why you’re here.
Why do this?
- Because it gives new readers context. What are you about? Why should they read your blog?
- Because it will help you focus you own ideas about your blog and what you’d like to do with it.
The post can be short or long, a personal intro to your life or a bloggy mission statement, a manifesto for the future or a simple outline of your the types of things you hope to publish.
To help you get started, here are a few questions:
- Why are you blogging publicly, rather than keeping a personal journal?
- What topics do you think you’ll write about?
- Who would you love to connect with via your blog?
- If you blog successfully throughout the next year, what would you hope to have accomplished?
You’re not locked into any of this; one of the wonderful things about blogs is how they constantly evolve as we learn, grow, and interact with one another — but it’s good to know where and why you started, and articulating your goals may just give you a few other post ideas.
Can’t think how to get started? Just write the first thing that pops into your head. Anne Lamott, author of a book on writing we love, says that you need to give yourself permission to write a “crappy first draft”. Anne makes a great point — just start writing, and worry about editing it later.
When you’re ready to publish, give your post three to five tags that describe your blog’s focus — writing, photography, fiction, parenting, food, cars, movies, sports, whatever. These tags will help others who care about your topics find you in the Reader. Make sure one of the tags is “zerotohero,” so other new bloggers can find you, too.
The Blogging of Connolly 253 